Difference between revisions of "Physical Vapor Deposition PVD - Vacuum/thermal coater"
Jump to navigation
Jump to search
Cmditradmin (talk | contribs) m |
Cmditradmin (talk | contribs) m |
||
| Line 3: | Line 3: | ||
<td style="text-align: center; width: 33%">[[<table id="toc" style="width: 100%"> | <td style="text-align: center; width: 33%">[[<table id="toc" style="width: 100%"> | ||
<tr> | <tr> | ||
<td style="text-align: center; width: 33%">[[Main_Page#Synthesis_and_Fabrication|Return to Research Tool Menu]]</td> | <td style="text-align: center; width: 33%">[[Main_Page#Synthesis_and_Fabrication | Return to Research Tool Menu]]</td> | ||
</tr> | </tr> | ||
Revision as of 09:41, 11 October 2011
[[
|
Background
Thermal vacuum coating is one the simplest and oldest of the physical vapor deposition techniques. A solid sample of material is heated in a vacuum and the particles that evaporate travel though the chamber and condense on the substrate. <swf width="400" height="400">images/4/44/Vacuumdep.swf</swf>
Significance
Thermal evaporation vacuum coating is most often used for depositing metal or metal oxide contacts on flat substrates. It is difficult to control the thickness of the deposit and surface irregularities may cause shadows. The temperature of the source determines the speed of the atoms as they hit the substrate thus making it possible to limit damage to the substrate. This is a relatively rapid technique suitable for roll to roll processing.