Difference between revisions of "Color and Chromaticity"
Cmditradmin (talk | contribs) |
Cmditradmin (talk | contribs) |
||
| Line 88: | Line 88: | ||
All colors can be create by the addition of the primary colors. | All colors can be create by the addition of the primary colors. Use this Flash application to explore color mixing. | ||
<swf width="400" height="300">http://depts.washington.edu/cmditr/media/colorbox.swf</swf> | <swf width="400" height="300">http://depts.washington.edu/cmditr/media/colorbox.swf</swf> | ||
Revision as of 07:37, 4 June 2009
| Previous Topic | Return to Luminescence Menu | Next Topic |
Light absorption
When a molecule interacts with light and energy is absorbed, the molecule is said be excited and a transition occurs which can take the molecule from an initial state to a higher energy state
Within the one-electron approximation, this is described by the promotion of an electron from a filled orbital to an unfilled orbital (in the case of diamagnetic materials). The difference in energy between those levels, (the excited state and the ground state), gives the energy of the photons that can be absorbed.
Several parameters can be used to characterize this transition, including the energy of the incident radiation required for the efficient absorption of the light and the inherent ability of the molecules to absorb radiation of the appropriate energy by the Planck relation:
- <math>\Delta E_{ge} = E_{excited state}-E_{ground state} = h\nu\,\!</math>
where hv is the energy of the photon corresponding to the energy gap between the states.
The energy is reported in several units; the following is helpful for translating between some common units one comes across in the literature:
1 eV = 23.06 kcal/mol = 8065 cm-1 = 1240 nm
Color
Our perception of color is determined by what wavelengths of radiation reach our eye and the sensitivity of the receptors in our eye to various colors The eye has rods and cones containing chromophores which convert light into electrical impulse that the brain uses to perceive images. This the opposite of what you see in light emitting diodes in which electricity causes emission of light.
The rods function under low intensity conditions and provide images in shades of black, grey, and white This is referred to as scotopic vision
The cones process images of high intensity in color which is referred to as photopic vision.
Cones come in three varieties which correspond roughly to blue, green, and red sensitivities; if all three cones are simultaneously excited, then the image will appear white.
Complementary Colors
If wavelengths of light from a certain region of the spectrum are absorbed by a material, then the materials will appear to be the complementary color Thus, for instance, if violet light with wavelength of 400nm is absorbed, the material will look yellow. If the material absorbs blue you will see the color orange.
| Color absorbed | Color seen |
|---|---|
| Violet | Yellow |
| Blue | Orange |
| Green | Red |
| Yellow | Violet |
| Orange | Blue |
Note that green is not indicated in the figure; this is because materials that appear green actually absorb in the red and the blue (i.e., about 650 nm and 425 nm) band shape and color
Our ability to perceive very small differences in color is rather extraordinary; for instance, two solutions which appear to have virtually identical absorption spectra, with minute differences in their tails, can be recognized as clearly different hues. Very small changes in the shape of an absorption band (not only the position) will cause materials to appear different shades
Bright and Dull
In general, colors that we perceive as brilliant and bright have strong narrow absorption bands whereas dull colors tend to have weaker and broader absorption bands.
Color Description
The hue is that aspect of color usually associated with terms such as red, orange, yellow, and so forth.Hue distinguishes the color purity of the dominant color (i.e. red from yellow). The position of absorption maxima largely determines this property.
saturation (also known as chroma, or tone) refers to relative purity; when a pure, vivid, strong shade of red is mixed with a variable amount of white, weaker or paler reds are produced, each having the same hue but a different saturation; such paler colors are called unsaturated colors. You can define the amount of saturation of a given using a chromaticity diagram. For example, suppose you had a red color and you slowly increased the amount of blue and green light reaching the eye, then the mixture of the red, blue and green would contribute to the perception of white. White plus red would give pink. The hue would not have been altered, but the saturation would be lower
Light of any given combination of hue and saturation can have a variable brightness (also called intensity, lightness, or value), which depends on the total amount of light energy present. Lightness of a color is changed by varying the intensity of all three primary colors by the same amount. For example, if the intensity of a red were increased it would appear brown.
All colors can be create by the addition of the primary colors. Use this Flash application to explore color mixing.
<swf width="400" height="300">http://depts.washington.edu/cmditr/media/colorbox.swf</swf>
| Previous Topic | Return to Luminescence Menu | Next Topic |