Difference between revisions of "Light Emitting Electrochemical Processes"

From CleanEnergyWIKI
Jump to navigation Jump to search
 
(95 intermediate revisions by 5 users not shown)
Line 1: Line 1:
This article serves as an introduction to the design and chemistry of organic light emitting diodes (OLED).
<table id="toc" style="width: 100%">
<tr>
<td style="text-align: left; width: 33%">[[OLED Device Applications|Previous Topic]]</td>
<td style="text-align: center; width: 33%">[[Main_Page#Organic_Light_Emitting_Diodes|Return to OLED Menu]]</td>
<td style="text-align: right; width: 33%">[[The OLED Test Cell|Next Topic]]</td>
</tr>
</table>


== Light emission in the OLED arises from recombination (electron transfer ) reactions of cation and anion radical of conjugated aromatic molecules. ==
Light emission in the OLED arises from recombination (electron transfer) reactions of the cation and anion radical of conjugated aromatic molecules.
== Light Emission from Recombination==


Several decades ago it was noted that poly(acenes) and related poly-aromatic hydrocarbons, in very dry nonaqueous (non-polar) solvents can be reduced by one electron (chemically or electrochemically) to produce an energetic radical anion state (D<sup>-.</sup>).  These same molecules can often be oxidized by one electron to produce a cation radical state (A<sup>+.</sup>).
Several decades ago it was noted that poly(acenes) and related poly-aromatic hydrocarbons, in very dry nonaqueous (non-polar) solvents can be reduced by one electron (chemically or electrochemically) to produce an energetic radical anion state (D<sup>-.</sup>).  These same molecules can often be oxidized by one electron to produce a cation radical state (A<sup>+.</sup>).
Should A<sup>+.</sup> and D<sup>-</sup>. encounter each other in solution, a “recombination” electron transfer reaction can occur – the excess free energy in this reaction can be deposited in one of the molecular species, to form its lowest excited state (singlet), or in some cases, its lowest triplet excited state – states which are the same as those created by photoexcitation of the molecule.  Emission from this state occurs with a lifetime of ca. nanoseconds, with quantum yields approaching 100% in some cases.
Should A<sup>+.</sup> and D<sup>-.</sup> encounter each other in solution, a “recombination” electron transfer reaction occurs. The excess free energy in this reaction can be deposited in one of the molecular species to form its lowest excited state (singlet), or in some cases, its lowest triplet excited state. These states are the same as those created by photoexcitation of the molecule.  Emission from this state occurs with a lifetime of nanoseconds, with [[Definition: Quantum Yield|quantum yields]] approaching 100% in some cases.
These “electrogenerated chemiluminescence” (ECL) processes are direct analogues of the charge recombination processes which occur in the condensed phase in an OLED.  They are also closely related to the [[wikipedia:chemiluminescence|chemiluminescence]] and bioluminescence processes which occur in living organisms, the most easily recognized example being the luminescence processes which occur in fireflys.
These “electrogenerated chemiluminescence” (ECL) processes are direct analogues of the charge recombination processes which occur in the condensed phase in an OLED.  They are also closely related to the chemiluminescence and bioluminescence processes which occur in living organisms such as fireflies.


It was quickly released that in order to create the emissive state by injection charge the following processes took place:
First  the loss of an electron by this conjugated aromatic system  to form a cation radical species.


Then the addition of electron to a similar species at the opposite electrode to give us an anion radical.
It was quickly realized that in order to create the emissive state by injection charge the following processes took place:
<embed_document width=40% height=300 >http://depts.washington.edu/cmditr/images/OLEDredox.pdf</embed_document>


These two species react and do an electron transfer reaction from the donor species to an acceptor species. There is a lot of excess free energy that is given off in this process which is can be predicted by the formal potentials for the formation of these two species.


Finally one of the molecules harvests this energy in the form of an excited state in a singlet or triplet state or both. This is the species that is used to emit light.
<br clear="all">


We can write this from the point of view of a homogenous electrochemical process. At the same time this was being done in the condensed phase people were beginning to explore this processes in solution. Rudy Marcus used this as a central tenant in his development of electron transfer theory between small molecule systems.
We can write this from the point of view of a homogenous electrochemical process. At the same time this was being done in the condensed phase people were beginning to explore this process in solution. Rudy Marcus used this as a central tenant in his development of electron transfer theory between small molecule systems.
== The Jablonski Diagram==


== The Jablonski diagram is used to describe the energy (wavelength) of absorbance and luminescence for aromatic molecules.==
[[Image:Jablonski.jpg|thumb|400px|Jablonski diagram for chemiluminence ]]
[[Image:Oled1 8 jablonski.png|400px|right|A Jablonski diagram]]
The [[Jablonksi Diagram]] diagram is a simple way to describe what is happening with small molecules and small conjugated aromatic systems. It describes the energy (wavelength) of absorbance and luminescence for aromatic molecules.
<gallery heights=200px widths=300px perrow =3>
Image:Oled1 8 jablonski.png|First, a photon is absorbed. Excited singlets are created with different vibronic excited levels. These are the vibronic levels associated with the population of the the &nu;=1, &nu;=2 levels.
Image:Oled1 10 absorbance.png|This shows the absorption spectra with its associated fine structure. This is the lowest energy of the absorption bands.
Image:Oled1_9_relaxation.png|That is followed by very fast non-radiative relaxation.
Image:Oled1_13_fluoresence.png|Finally there is fluorescence decay which gives back the energy in the form of an emissive state. The lifetime for fluorescence is on the order of nanoseconds.
Image:Oled1_14_abs-lum-graph.png|The spectral response for this molecule looks like a mirror image of the absorption spectrum. There is a small shift called the Stokes shift which is typical for planar aromatic compounds such as anthracene.
Image:Oled1_15_phosphor.png| This diagram shows both the vibronic excited state and the ground state. Once the excited singlet state has been formed there is the possibility of intersystem crossing to a triplet state. This change in spin is a forbidden process (an energy transition not normally allowed by quantum mechanics), causing triplet states to be much longer-lived.
</gallery>
Most molecules have lifetimes of 1-100 microseconds. Compounds that are most useful for OLEDs have lifetimes closer to  1 microsecond.  Most people are familiar with molecules that phosphoresce with much longer lifetimes and have emission events at much longer wavelengths, making them less useful for displays.


The [[Jablonksi]] diagram is our way of describing what is happening with small molecules and small conjugated aromatic systems.  
==Color of Absorption and Emission ==
The color of absorption and emission in simple molecular systems is controlled by the structure of the molecule and by the degree of conjugation in the aromatic system.
As the number of aromatic rings increases in these molecular systems, the energy for both the absorption and emission events goes down, shifting them to the red side of the spectrum. The same can be said for the carotenoid-like assemblies where increasing the number of double bonds in the system changes both the energy of absorption and emission.
For most polyacine-like systems, there is an absorption and emission event, a small Stokes shift, and a change of wavelength of these two depending on the degree of conjugation in the aromatic system.


First we have the absorption of a photon and the creation of excited singlets states with different vibronic excited levels.
This shows the absorption spectra with its associated fine structure. This is the lowest energy of the absorption bands  these are the vibronic levels associated with the population of the the ν=1 , ν =2 levels.


That is followed very fast non-radiative relaxation.
== The Ratio of Singlet State to Triplet  ==
The ratio of singlet state to triplet state formations helps determine OLED efficiency.
[[Image:Oled1_18_spinstatics.png|thumb|left|400px|right|Singlet recombination]]
[[Image:Oled1_19_spinstatics.png|thumb|right|400px|right|Triplet recombination]]
<br clear="all">
<gallery widths=400 heights=300>


Finally there is fluorescent decay to give back the energy in form of an emissive state. The spectral response for this molecule which looks like a mirror image of the absorption spectrum. There is a small shift called the Stokes shift which very typical for planar aromatic compounds such as anthracene and related molecules. The lifetimes for fluorescence is on the order of nanoseconds typically.
Image:Oled1_15_phosphor.png|Phosphorescence with linked systems
Image:Oled1_19_jablonski ratio.png|During electrochemical excitation of these systems, 25% of the energy is deposited as singlet states, and 75% of the energy is deposited as triplet states. This significantly impacts the optimization of OLEDs which use either fluorescent molecules or phosphorescent dopants to create light. The use of phosphorescent dopants has increased efficiency to the near fluorescent lighting levels.
</gallery>


The following is a simplified description of the spin statistics of recombination. We start with a molecule in which an electron has been removed. The spin of the remaining electron in the two-level diagram can either be up or down. The electron in the donor molecular can either be spin-up or spin-down. During the process of electron transfer we create either an excited singlet state of the acceptor and a neutral donor, or excited singlet state of the donor and a neutral acceptor.
Once the excited singlet state has been formed there is the possibility of doing intersystem crossing to a triplet state. This change in spin is a forbidden process and as a consequence triplet states tend to be much longer lived. Most molecules have lifetimes of the order of 1-100 microseconds. Those compounds that are most useful for organic light emitting diodes will have lifetimes closer to  1 microsecond.  Most people are familiar with molecules that [[phosphorescence]] with much longer lifetime  and these which are less useful. Vibronic excited states and a ground state.  These tend to have emission events at much longer wavelengths.


This a summary taken from a Florida state website that gives all the different lifetime ranges associated with excitation,  nonradiative relaxation an extremely fast process, with decay, fluoresces or via intersystem crossing and then phosphorescence back to the ground state.
During the electron transfer event, a contact ion pair (or solvent-separated ion pair if in solution) is formed. It is a single entity, so by exchanging electrons, either a singlet of the donor or singlet of the acceptor is created. Typically, the molecule with the lowest emissive energy will receive the excess energy during this process. In an actual OLED, the lowest band gap molecule will be the emissive species.


== The color of absorption and emission in simple molecular systems is controlled by the structure of the molecule and by the  degree of conjugation in the aromatic system. ==
There are three types of triplets which can be formed, making it 3 times more likely to form a triplet state than a singlet state. This accounts for the 3:1 triplet to singlet ratio. Consequently, when optimizing a light source, it is important to harvest as much energy as possibly from the triplet state.


In general as the number of aromatic rings increases in these molecular systems the energy for both the absorption and emission events goes down, ie they shift to the red. The same can be said for the carotenoid like assemblies where just increasing the number of double bonds in the system changes both the energy of absorption and emission.
<br clear="all">
To summarize for most polyacine- like systems  which were among  the first to be examined by this process. There is an absorption and emission event, a small Stokes shift, and  a change of wavelength of these two depending on the degree of conjugation in the aromatic system.


== The ratio of singlet state to triplet state formation helps to determine the OLED efficiency. ==
== Electrogenerated Chemiluminescence Studies==
[[Image:Oled1_18_spinstatics.png|400px|right|Singlet recombination]]
Small molecules are used in electrogenerated chemiluminescence (ECL) studies to help elucidate these light emitting processes in condensed phases.
When see electrochemical excitation of these systems we tend to find that the number singlet state and triplet states partitions with 25% of energy deposited as singlet states and 75%of energy deposited in triplet states.  This has a significant impact the optimization of organic light emitting diodes that either going to use fluorescent molecules to create the light to produce the light or phosphorescent dopants to create the light. The advent of the use of phosphorescent dopants has increased the efficiency to the near fluorescent lighting levels.
[[Image:Oled1 23 threeECLmolecules.png|center|400px]]
Several other molecular species are now known to provide stable one-electron reduced states and one-electron oxidized states in dry, non-polar solvents.  These recombination charge transfer processes produce blue-emitting states (diphenylanthracene, [[DPA]]), green-emitting states (di-isoamylquinacridone, DIQA, and other N,N’ dialkyl derivatives of quinacridone), yellow-emitting states (rubrene), and red-emitting states (ruthenium-trisbypryidine, Ru(bpy)<sup>+3</sup>).  The emissive states of these molecules can be produced by charge transfer reactions between their reduced and oxidized forms. The separation in formal potentials for oxidation by one electron and reduction by one electron, expressed in electron volts, slightly exceeds the energy needed to directly excite the molecule to its lowest singlet state (S<sub>0</sub> → S<sub>1</sub>).
[[category:organic LED]]


[[Image:Oled1_19_spinstatics.png|400px|right|Triplet recombination]]
<table id="toc" style="width: 100%">
 
<tr>
How does this happen? The spin statistics of recombination can be described in a number of ways. This is the simplest way but there are some short comings to this simplistic description. We start with a molecule in which an electron has been removed the spin of the remaining electron in the two level diagram can either be up or down. The electron in the donor molecular can either be spin up or spin down. During the process of electron transfer we create either an excited singlet state of the acceptor and the neutral donor or excited singlet state of the donor and the neutral acceptor.
<td style="text-align: left; width: 33%">[[OLED Device Applications|Previous Topic]]</td>
 
<td style="text-align: center; width: 33%">[[Main_Page#Organic_Light_Emitting_Diodes|Return to OLED Menu]]</td>
The details of this are somewhat complicated. During this electron transfer event  there forms a contact ion pair or solvent separated ion pair if it is in solution. It is single entity and by this means we can exchange electrons and create either  a singlet of the donor or singlet of the acceptor. Typically it the molecule with the lowest emissive energy that winds up having the excess energy from this process. In this case you can’t really tell because they were both identical to begin with. In actual organic light emitting diode it is the lowest band gap molecule that ends up being the emissive species.
<td style="text-align: right; width: 33%">[[The OLED Test Cell|Next Topic]]</td>
 
</tr>
Finally, to form the triplet state you can have three types of triplets. Thus it is three times as likely to form a triplet as it is a singlet which accounts for the 3:1 triplet to singlet ratio in systems of this type. It is debated whether or not these ratios apply in the condensed phases. They apply in solutions and early indications  are that it also applies in the condensed state.  The consequence of this is that if you are going to optimize a light source you must harvest as much of energy of the triplet state as possible.
</table>
 
== Small molecules are used in electrogenerated chemiluminescence (ECL) studies to help elucidate these light emitting processes in “condensed phases” ==
 
In the following discussions we will focus on polyacine derivatives. The diphenylanthracene (DPA) has been the fruitfly of the electro generated chemiluminescence community. It can be reduced by one electron to form the radical anion and can be oxidized to form the cation.
 
Rubrene is  an elaboration of DPA. It is a yellow emitter. It has simple one electron oxidation and reduction events.
Di iosamyl quinacridone (DIQA) was introduced by the OLED community was the first category of dopants  to produce green light. It has a very stable one electron oxidation and one electron reduction product.  It undergoes solution electro generated chemiluminesence that tells us lot of about how light is formed in these devices.  

Latest revision as of 14:44, 21 July 2010

Previous Topic Return to OLED Menu Next Topic

Light emission in the OLED arises from recombination (electron transfer) reactions of the cation and anion radical of conjugated aromatic molecules.

Light Emission from Recombination

Several decades ago it was noted that poly(acenes) and related poly-aromatic hydrocarbons, in very dry nonaqueous (non-polar) solvents can be reduced by one electron (chemically or electrochemically) to produce an energetic radical anion state (D-.). These same molecules can often be oxidized by one electron to produce a cation radical state (A+.). Should A+. and D-. encounter each other in solution, a “recombination” electron transfer reaction occurs. The excess free energy in this reaction can be deposited in one of the molecular species to form its lowest excited state (singlet), or in some cases, its lowest triplet excited state. These states are the same as those created by photoexcitation of the molecule. Emission from this state occurs with a lifetime of nanoseconds, with quantum yields approaching 100% in some cases. These “electrogenerated chemiluminescence” (ECL) processes are direct analogues of the charge recombination processes which occur in the condensed phase in an OLED. They are also closely related to the chemiluminescence and bioluminescence processes which occur in living organisms such as fireflies.


It was quickly realized that in order to create the emissive state by injection charge the following processes took place: <embed_document width=40% height=300 >http://depts.washington.edu/cmditr/images/OLEDredox.pdf</embed_document>



We can write this from the point of view of a homogenous electrochemical process. At the same time this was being done in the condensed phase people were beginning to explore this process in solution. Rudy Marcus used this as a central tenant in his development of electron transfer theory between small molecule systems.

The Jablonski Diagram

Jablonski diagram for chemiluminence

The Jablonksi Diagram diagram is a simple way to describe what is happening with small molecules and small conjugated aromatic systems. It describes the energy (wavelength) of absorbance and luminescence for aromatic molecules.

  • First, a photon is absorbed. Excited singlets are created with different vibronic excited levels. These are the vibronic levels associated with the population of the the ν=1, ν=2 levels.

  • This shows the absorption spectra with its associated fine structure. This is the lowest energy of the absorption bands.

  • That is followed by very fast non-radiative relaxation.

  • Finally there is fluorescence decay which gives back the energy in the form of an emissive state. The lifetime for fluorescence is on the order of nanoseconds.

  • The spectral response for this molecule looks like a mirror image of the absorption spectrum. There is a small shift called the Stokes shift which is typical for planar aromatic compounds such as anthracene.

  • This diagram shows both the vibronic excited state and the ground state. Once the excited singlet state has been formed there is the possibility of intersystem crossing to a triplet state. This change in spin is a forbidden process (an energy transition not normally allowed by quantum mechanics), causing triplet states to be much longer-lived.

Most molecules have lifetimes of 1-100 microseconds. Compounds that are most useful for OLEDs have lifetimes closer to 1 microsecond. Most people are familiar with molecules that phosphoresce with much longer lifetimes and have emission events at much longer wavelengths, making them less useful for displays.

Color of Absorption and Emission

The color of absorption and emission in simple molecular systems is controlled by the structure of the molecule and by the degree of conjugation in the aromatic system. As the number of aromatic rings increases in these molecular systems, the energy for both the absorption and emission events goes down, shifting them to the red side of the spectrum. The same can be said for the carotenoid-like assemblies where increasing the number of double bonds in the system changes both the energy of absorption and emission. For most polyacine-like systems, there is an absorption and emission event, a small Stokes shift, and a change of wavelength of these two depending on the degree of conjugation in the aromatic system.


The Ratio of Singlet State to Triplet

The ratio of singlet state to triplet state formations helps determine OLED efficiency.

Singlet recombination
Triplet recombination


  • Phosphorescence with linked systems

  • During electrochemical excitation of these systems, 25% of the energy is deposited as singlet states, and 75% of the energy is deposited as triplet states. This significantly impacts the optimization of OLEDs which use either fluorescent molecules or phosphorescent dopants to create light. The use of phosphorescent dopants has increased efficiency to the near fluorescent lighting levels.

The following is a simplified description of the spin statistics of recombination. We start with a molecule in which an electron has been removed. The spin of the remaining electron in the two-level diagram can either be up or down. The electron in the donor molecular can either be spin-up or spin-down. During the process of electron transfer we create either an excited singlet state of the acceptor and a neutral donor, or excited singlet state of the donor and a neutral acceptor.

During the electron transfer event, a contact ion pair (or solvent-separated ion pair if in solution) is formed. It is a single entity, so by exchanging electrons, either a singlet of the donor or singlet of the acceptor is created. Typically, the molecule with the lowest emissive energy will receive the excess energy during this process. In an actual OLED, the lowest band gap molecule will be the emissive species.

There are three types of triplets which can be formed, making it 3 times more likely to form a triplet state than a singlet state. This accounts for the 3:1 triplet to singlet ratio. Consequently, when optimizing a light source, it is important to harvest as much energy as possibly from the triplet state.


Electrogenerated Chemiluminescence Studies

Small molecules are used in electrogenerated chemiluminescence (ECL) studies to help elucidate these light emitting processes in condensed phases.

Oled1 23 threeECLmolecules.png

Several other molecular species are now known to provide stable one-electron reduced states and one-electron oxidized states in dry, non-polar solvents. These recombination charge transfer processes produce blue-emitting states (diphenylanthracene, DPA), green-emitting states (di-isoamylquinacridone, DIQA, and other N,N’ dialkyl derivatives of quinacridone), yellow-emitting states (rubrene), and red-emitting states (ruthenium-trisbypryidine, Ru(bpy)+3). The emissive states of these molecules can be produced by charge transfer reactions between their reduced and oxidized forms. The separation in formal potentials for oxidation by one electron and reduction by one electron, expressed in electron volts, slightly exceeds the energy needed to directly excite the molecule to its lowest singlet state (S0 → S1).

Previous Topic Return to OLED Menu Next Topic
Retrieved from "http://cleanenergywiki.org/index.php?title=Light_Emitting_Electrochemical_Processes&oldid=7538"