Difference between revisions of "Classification and Examples of Liquid Crystals"

From CleanEnergyWIKI
Jump to navigation Jump to search
 
(65 intermediate revisions by the same user not shown)
Line 7: Line 7:
</table>
</table>


== Classification ==
Liquid crystals can be classified by their behavior and by their physical structure.
== Classification of Liquid Crystals ==
 
[[Image:Classification_lc.png|thumb|500px|]]
[[Image:Classification_lc.png|thumb|500px|]]
Liquid crystals can be first organized into thermotropic (temperature dependent) and lyotropic (concentration dependent). Within thermotropic liquid crystals there are high molar mass materials (suitable for polymer) and low molar mass materials. Within the polymeric kind there are main chain polymers where the chains align in a direction, or a chain where there is comb-like structure with side chains that hang off the polymer. The director is oriented either along the main chain or parallel to the side chains.
Liquid crystals can be first organized into thermotropic (temperature dependent) and lyotropic (concentration dependent). Within thermotropic liquid crystals there are high molar mass materials (suitable for polymer) and low molar mass materials. Within the polymeric kind there are main chain polymers where the chains align in a direction, or a chain where there is comb-like structure with side chains that hang off the polymer. The director is oriented either along the main chain or parallel to the side chains.


In the low molar mass materials there are disc like molecules (discotic) and rod like molecules (calamitic liquid crystals). Within the rod-like LC are nematic (N) with ordinary Nematics or Twisted Nematics in which the director changes across the material, and smectic (S) (also known as bookshelf liquid crystals) which tend to line up perpendicularly (Sa) or tilted  on the long axis (Sc)
In the low molar mass materials there are disc like molecules (discotic) and rod like molecules (calamitic liquid crystals). Within the rod-like LC are nematic (N) with ordinary Nematics or Twisted Nematics in which the director changes across the material, and smectic (S) (also known as bookshelf liquid crystals) which tend to line up perpendicularly (S<sub>a</sub>) or tilted  on the long axis (S<sub>c</sub>)
<br clear='all'>
<br clear='all'>


=== Calamitic vs Discotic ===
=== Calamitic vs Discotic ===
[[Image:Cyanobiphenyls.png|thumb|300px|Common molecules used to create liquid crystals. Calamitic (left) Discotic (right)]]
[[Image:Cyanobiphenyls.png|thumb|300px|Common molecules used to create liquid crystals. Calamitic (left) Discotic (right)]]


Line 23: Line 27:
The discotics such as triphenylenes can stack up but have long tails (akyl or alkoxy with C12 groups) that allow the discs to remain flexible so they do not become fully crystalline but has a discotic liquid crystal phase.
The discotics such as triphenylenes can stack up but have long tails (akyl or alkoxy with C12 groups) that allow the discs to remain flexible so they do not become fully crystalline but has a discotic liquid crystal phase.


=== Classification of Liquid Crystals According to Degree of Order ===
== Calamitic Liquid Crystals ==
[[Image:140px-LiquidCrystal-MesogenOrder-Nematic.jpg|thumb|300px|]]
[[Image:Director_lc_plain.png|thumb|100px|center|Note the lack of positional order along the axis of the director
]]


<gallery widths=200px heights=200px perrow=3>Image: Director_lc_plain.png| Image: 140px-LiquidCrystal-MesogenOrder-Nematic.jpg|First the loss of an electron by this conjugated aromatic system to form a cation radical species. Image:Oled1_4_eclredox.png‎‎|comment </gallery>  
=== Nematic Liquid Crystals ===
<gallery widths=100px heights=200px perrow=3 align=right>
Image:Director_lc_plain.png‎‎|Note the lack of positional order along the axis of the director
Image:LiquidCrystal-MesogenOrder-Nematic.jpg|Molecules align in liquid crystal phase
</gallery>


Nematics (from the Greek: nematon- thread-like) are uniaxial liquid crystals in which the average direction of the long axes of the molecules defines the direction N.
Nematics (from the Greek: nematon- thread-like) are uniaxial liquid crystals in which the average direction of the long axes of the molecules defines the direction N.
Line 38: Line 43:
It is important to be able to control the temperature range in which liquid crystals operate. Most liquid displays are not made up out of single molecules. It is made up with a combination of molecules that gives the desirable transition temperatures on the low end and high end of operating temperatures.
It is important to be able to control the temperature range in which liquid crystals operate. Most liquid displays are not made up out of single molecules. It is made up with a combination of molecules that gives the desirable transition temperatures on the low end and high end of operating temperatures.


For more liquid crystal images see [http://www.lci.kent.edu/lcimages.html Liquid Cyrstal Institute]
For more liquid crystal images see [http://www.lci.kent.edu/lcimages.html Liquid Crystal Institute]
 
<br clear='all'>


=== Cholesteric Phase ===
=== Cholesteric Phase ===
<br clear='all'>


[[Image:Cholesteric.png|thumb|400px|In a cholesteric state the director twists at different levels.]]


Cholesteric is the nematic state superimposed with a natural twist between layers including the long axis of the molecules induced by the incorporation of chiral group to give helical twist to the orientation of the director.   
Cholesteric is the nematic state superimposed with a natural twist between layers including the long axis of the molecules induced by the incorporation of chiral group to give helical twist to the orientation of the director.   
Line 54: Line 61:
The pitch is very sensitive to temperature and accordingly, cholesteric LC have temperature dependent optical properties--remember mood rings
The pitch is very sensitive to temperature and accordingly, cholesteric LC have temperature dependent optical properties--remember mood rings


== Smectic Phases ==
=== Smectic Phases ===
<gallery widths=100px heights=200px perrow=3 align =right>
Image:Smectic_A.png‎|Smectic A are aligned along position planes.
Image:Smectic_C.png|Smectic C has an orientation offset from the position plane
Image:Fächertextur.jpg|Smectic C liquid crystal under polarized light
</gallery>


Smectic phases have more positional order perpendicular to the director resulting in a “bookshelf “ordering.
Smectic phases have more positional order perpendicular to the director resulting in a “bookshelf “ordering.
Line 61: Line 73:


Smectic C is a smectic A like structure in which the long axes of the molecules of a tilted average angle differing from 90° with respect to the plane of the layer in a "bookshelf” arrangement.  Light can be diffracted off the periodic spaces give a variety of patterns.  
Smectic C is a smectic A like structure in which the long axes of the molecules of a tilted average angle differing from 90° with respect to the plane of the layer in a "bookshelf” arrangement.  Light can be diffracted off the periodic spaces give a variety of patterns.  


This molecule goes from crystalline to Smectic B, to smectic, C to smectic, A to nematic, to isotropic at various temperatures.
This molecule goes from crystalline to Smectic B, to smectic, C to smectic, A to nematic, to isotropic at various temperatures.
:<math>K \quad _{\overrightarrow {113^{\circ} C}} \quad  B  \quad  _{\overrightarrow {144^{\circ} C}} \quad  C  \quad  _{\overrightarrow {172^{\circ} C}}  \quad A  \quad  _{\overrightarrow {200^{\circ} C}}  \quad N \quad  _{\overrightarrow {200^{\circ} C}} \quad  I\,\!</math>
<br clear='all'>
[[Image:Smectic_Cstar.png|thumb|300px|Smectic C* molecules are visualized as cones showing possible orientations of the dipole]]
Smectic C* If a smectic phase is chiral and has an off axis dipole then as you go from layer to layer the director will maintain a tilt angle with respect to the layer plane but that rotates about a cone from layer to layer. The molecules can rotate about the cone; a chiral rotation.  Smectic C* often have  a dipole that off the axis of the director.


For more liquid crystal images see [http://www.lci.kent.edu/lcimages.html Liquid Crystal Institute]
For more liquid crystal images see [http://www.lci.kent.edu/lcimages.html Liquid Crystal Institute]


=== Smectic C* ===


If a smectic phase is chiral and has an off axis dipole then as you go from layer to layer the director will maintain a tilt angle with respect to the layer plane but that rotates about a cone from layer to layer. The molecules can rotate about the cone; a chiral rotation.  Smectic C* often have  a dipole that off the axis of the director.
 
<br clear='all'>


===  Ferroelectric Smectic C* ===
===  Ferroelectric Smectic C* ===
 
[[Image:Smectic_Cstar__ferro.png|thumb|400px|An applied electric field will align the dipoles of ferroelectric molecules creating a bulk dipole moment]]


If the helix can be unwound such that all the dipoles (and directors stay at the same angle as shown below) then the molecules will form a ferroelectric phase.   
If the helix can be unwound such that all the dipoles (and directors stay at the same angle as shown below) then the molecules will form a ferroelectric phase.   
Line 82: Line 101:


== Discotic Liquid Crystals ==
== Discotic Liquid Crystals ==
[[Image:Discotic-nematic.png|thumb|300px|Nematic Discotic (left) and Columnar Discotic (right) liquid crystals]]
A discotic phase in one is which flat molecules typically with threefold or four fold symmetry that have a rigid core and several floppy side chains stacked with their planes lying roughly parallel to one another.  Thus, the director is oriented roughly perpendicular to the plane of the molecule. If you throw pieces of paper down they will stack up as parallel planes. There is a difference in the definition of the director between calamitic and nematic liquid crystals. In calamitic liquid crystals the director is defined as being along the axis of the moment of inertia of the molecules. In nematic liquid crystals the director is perpendicular to the average plane of all the liquid crystals.  
A discotic phase in one is which flat molecules typically with threefold or four fold symmetry that have a rigid core and several floppy side chains stacked with their planes lying roughly parallel to one another.  Thus, the director is oriented roughly perpendicular to the plane of the molecule. If you throw pieces of paper down they will stack up as parallel planes. There is a difference in the definition of the director between calamitic and nematic liquid crystals. In calamitic liquid crystals the director is defined as being along the axis of the moment of inertia of the molecules. In nematic liquid crystals the director is perpendicular to the average plane of all the liquid crystals.  




In nematic discotics phases there is no positional order between the molecules but only orientational order.
In nematic discotics phases there is no positional order between the molecules, only orientational order.


In the case of columnar discotic phases the molecules themselves lie roughly on top of each other, so there is some degree of positional order. This columns of discs tend to form hexagonal patterns and these phases are called hexagonal columnar discotics. Columnar molecules can have specific shapes which cause them to line up perfectly or rotate as they fit together.
In the case of columnar discotic phases the molecules themselves lie roughly on top of each other, so there is some degree of positional order. This columns of discs tend to form hexagonal patterns and these phases are called hexagonal columnar discotics. Columnar molecules can have specific shapes which cause them to line up perfectly or rotate as they fit together.
<br clear='all'>
[[Image:120px-Phthalocyanine_Green_G.png|thumb|300px|A phthalocyanine]]
Klaus Mullen is a talented chemist at the Max Planck Institute for Polmer Science in Mainz. He has started to make graphitic type molecules based on molecules such as triphenylene, thalocyanine, and hexobenzochoridine. The common characteristic is a common &pi; core that is roughly flat with flexible alkyl chains on the periphery. These molecules have been examined for use as charge transport materials.


Klaus Mullen is a talented chemist at the Max Planck Institute for Polmer Science in Mainz. He has started to make graphitic type molecules based on molecules such as triphenylene, thalocyanine, and hexobenzochoridine. The common characteristic is a common pi core that is roughly flat with flexible alkyl chains on the periphery.  
see Mullen 2004 <ref>http://www.rsc.org/ej/jm/2004/b312789c.pdf</ref>


== Charge Transport in Liquid Crystals ==


<br clear='all'>
=== Hopping Mechanism for Charge Transport ===
=== Hopping Mechanism for Charge Transport ===
[[Image:Hopping_lc.png|thumb|400px|Hopping transport in donor an acceptor materials]]


These molecules have been examined for use as charge transport materials. In the hopping model of transport there is series of redox reactions in which electrons are transferred from site to site. This requires a good overlap between the orbitals. Discotic crystals have the ability to overlap.
In the hopping model of transport there is series of redox reactions in which electrons are transferred from site to site. This requires a good overlap between the orbitals. Discotic crystals have the ability to overlap.


See [[Band Regime versus Hopping Regime]]
<br clear='all'>


=== Increasing Order in Materials ===
=== Increasing Order in Materials ===
 
[[Image:Order_mobility.png|thumb|300px|Charge mobility increases with intermolecular order]]


The charge mobility increases with the increase in intermolecular order. An amorphous polymer has no crystalline order, no positional order or orientational order. At the other extreme is the crystalline order that is “perfectly” stacked. Usually even crystals that are 99.9% pure will have an impurity in a cell that is only 10x10x10 molecules. Cyrstals are seldom pure or perfect. The typical tools we use for elemental analysis have an error bar in the range of impurity concentrations that will cause a problem for electronic purposes. Elemental analysis can tell you things are not good, but can’t really tell you that you are dealing with pure materials.
The charge mobility increases with the increase in intermolecular order. An amorphous polymer has no crystalline order, no positional order or orientational order. At the other extreme is the crystalline order that is “perfectly” stacked. Usually even crystals that are 99.9% pure will have an impurity in a cell that is only 10x10x10 molecules. Cyrstals are seldom pure or perfect. The typical tools we use for elemental analysis have an error bar in the range of impurity concentrations that will cause a problem for electronic purposes. Elemental analysis can tell you things are not good, but can’t really tell you that you are dealing with pure materials.


There is an intermediate a degree of order in the liquid crystal materials. Both discotic and calamitic materials have been explored for transport. The predictability of getting  a discotic liquid crystalline phase is somewhat higher that predicting crystal structures. However, the degree of certainty of where the molecules are in the liquid crystal phase is lower that you get with a single crystal that can be studied with a xray crystallography.  
There is an intermediate a degree of order in the liquid crystal materials. Both discotic and calamitic materials have been explored for transport. The predictability of getting  a discotic liquid crystalline phase is somewhat higher that predicting crystal structures. However, the degree of certainty of where the molecules are in the liquid crystal phase is lower that you get with a single crystal that can be studied with a X-ray crystallography.  


Charge mobilities (measured in cm2/Vs) for amorphous materials are <10-3 and single crystal  are more than 1 cm2/Vs (typical of amorphous silicon)
Charge mobilities (measured in cm<sup>2</sup>/Vs) for amorphous materials are <10<sup>-3</sup> and single crystal  are more than 1 cm<sup>2</sup>/Vs (typical of amorphous silicon)


=== Core Size Effects on Charge Mobility ===
=== Core Size Effects on Charge Mobility ===
 
[[Image:Coresize_mobility.png|thumb|500px|Trends for core size and associated charge carrier mobility]]
This study shows that for a certain class of the molecules with increasing core size there is a tendency for higher mobilities. There may be specific interactions that lead to a higher degree of order and there molecular properties which contribute to higher mobility. All these discotic liquid crystal materials have better mobilities than amorphous materials.
This study shows that for a certain class of the molecules with increasing core size there is a tendency for higher mobilities. There may be specific interactions that lead to a higher degree of order and there molecular properties which contribute to higher mobility. All these discotic liquid crystal materials have better mobilities than amorphous materials.


Line 114: Line 141:




See Warman 2001 van de Craats, A. M.; Warman, J. M. Adv. Mater. 2001, 13,130-133.
See Warman 2001 <ref>van de Craats, A. M.; Warman, J. M. Adv. Mater. 2001, 13,130-133</ref>.


<br clear='all'>
=== Extending the size of the core: From Perylene to Coronene ===
=== Extending the size of the core: From Perylene to Coronene ===
[[Image:Coronene_structure.png|thumb|200px|Coronene]]
The perylene diimide has a columnar discotic pattern with a mobility of about 1 cm<sup>2</sup>/Vs . A coronene with a large core with a mobility of 3 cm<sup>2</sup>/Vs. You can use these materials for their electronic properties as well as their optical properties.


The perylene diimide has a columnar discotic pattern with a mobility of about 1 . A coronene with  a large core with a mobility of 3. You can use these materials for their electronic properties as well as their optical properties.
<br clear='all'>


== Summary of Phases and Order ==
== Summary of Phases and Order ==
phase order 
Isotropic liquid full continuous translational and rotational symmetry (on average)
Nematic molecular orientation breaks rotational symmetry, one axis is different from another axis 


untilted tilted  
{| class="wikitable" border="1"
Smectic-A Smectic-C layering breaks translational symmetry; in smectic-C molecules are tilted  
|-
Hexatic SBSI SK Like the smectic A they are stacks of liquid layers but the molecules tend to be positioned along a hexagonal lattice within each plane
!  phase
! order
 
|-
|  Isotropic liquid
|  full continuous translational and rotational symmetry (on average)
 
|-
|  Nematic
|  molecular orientation breaks rotational symmetry, one axis is different from another axis
 
|}
 
 
 
{| class="wikitable" border="1"
|-
!  untilted
!  tilted
 
|-
|  Smectic-A
|  Smectic-C layering breaks translational symmetry; in smectic-C molecules are tilted
 
|-
|  Hexatic SBSI SK
|  Like the smectic A they are stacks of liquid layers but the molecules tend to be positioned along a hexagonal lattice within each plane  
 
|}
 
 
Plastic crystals - Smectic (Crystal) - B the rigid part of the crystals stay ordered but the long chain aliphatic tail melt (according to de Gennes), more appropriately called a crystal


Plastic crystals
Crystal- molecular rotation freezes out
Smectic (Crystal) -B the rigid part of the crystals stay ordered but the long chain aliphatic tail melt (according to de Gennes), more appropriately called a crystal


Crystal- molecular rotation freezes out
*The degree of order increases from the top to the bottom of the table. In general, phases from the top of the table are expected at high temperatures, and phases from the bottom at low temperatures.


The degree of order increases from the top to the bottom of the table. In general, phases from the top of the table are expected at high temperatures, and phases from the bottom at low temperatures.
*In the discotic phase, and columnar phases, translational symmetry is broken in not one but two spatial directions, leaving liquid-like order only along columns.


In the discotic phase, and columnar phases, translational symmetry is broken in not one but two spatial directions, leaving liquid-like order only along columns.
== References ==  
== References ==  
<references/>  
<references/>  

Latest revision as of 11:16, 20 July 2010

Previous Topic Return to Liquid Crystal Menu Next Topic

Liquid crystals can be classified by their behavior and by their physical structure.

Classification of Liquid Crystals

Classification lc.png

Liquid crystals can be first organized into thermotropic (temperature dependent) and lyotropic (concentration dependent). Within thermotropic liquid crystals there are high molar mass materials (suitable for polymer) and low molar mass materials. Within the polymeric kind there are main chain polymers where the chains align in a direction, or a chain where there is comb-like structure with side chains that hang off the polymer. The director is oriented either along the main chain or parallel to the side chains.

In the low molar mass materials there are disc like molecules (discotic) and rod like molecules (calamitic liquid crystals). Within the rod-like LC are nematic (N) with ordinary Nematics or Twisted Nematics in which the director changes across the material, and smectic (S) (also known as bookshelf liquid crystals) which tend to line up perpendicularly (Sa) or tilted on the long axis (Sc)


Calamitic vs Discotic

Common molecules used to create liquid crystals. Calamitic (left) Discotic (right)

Remember molecules are not liquid crystals--phases are!

The cyanobiphenyls are used routinely in displays. These calamitic liquid crystals have a rigid polarizable core and have a flexible aliphatic tail on one of the sides. The cores makes them want to line up and be more crystalline, while the flexible tail lowers the degree of order so they can flow. The may have polar groups such the cyano group along the main axis, a fluorine group off the main axis, or a dipole moment due to nitrogens in one of the rings along the axis. This will be important when we attempt to orient the materials in an applied field.

The discotics such as triphenylenes can stack up but have long tails (akyl or alkoxy with C12 groups) that allow the discs to remain flexible so they do not become fully crystalline but has a discotic liquid crystal phase.

Calamitic Liquid Crystals

Nematic Liquid Crystals

  • Note the lack of positional order along the axis of the director

  • Molecules align in liquid crystal phase

Nematics (from the Greek: nematon- thread-like) are uniaxial liquid crystals in which the average direction of the long axes of the molecules defines the direction N.

Nematic liquid crystals have one axis in which the polarizability, and the dielectric constant and the index of refraction are different from the other two axes (the illustration is exaggerated for how aligned the molecules would be) Note the lack of positional order along the axis of the director. The spacing between molecules in all directions is not uniform. They have characteristic textures when viewed under cross polarized light microscope. These materials are birefringent and allowing light with different polarizations to go through at different speeds.

Two examples are cyanobiphenyls and another with rigid and mantle group in the system.

It is important to be able to control the temperature range in which liquid crystals operate. Most liquid displays are not made up out of single molecules. It is made up with a combination of molecules that gives the desirable transition temperatures on the low end and high end of operating temperatures.

For more liquid crystal images see Liquid Crystal Institute


Cholesteric Phase

In a cholesteric state the director twists at different levels.

Cholesteric is the nematic state superimposed with a natural twist between layers including the long axis of the molecules induced by the incorporation of chiral group to give helical twist to the orientation of the director.

The pitch is the period for the director to rotate 180 degrees. The pitch of the twist is quite sensitive to temperature.

Adding a chiral dopant to a nematic liquid crystal will induce a helical twist to create a chiral nematic phase. Remember it is the phase that is chiral not necessarily the molecule itself.

A cholesteric liquid can diffract light differently depending upon the pitch of the liquid crystal according to the equation λ = np, where λ is the wavelength of light, n is the refractive index and p is the pitch. Because of the periodic pitch there is a lattice spacing and therefore it is possible to diffract light. This accounts for the colors often seen.

The pitch is very sensitive to temperature and accordingly, cholesteric LC have temperature dependent optical properties--remember mood rings

Smectic Phases

  • Smectic A are aligned along position planes.

  • Smectic C has an orientation offset from the position plane

  • Smectic C liquid crystal under polarized light

Smectic phases have more positional order perpendicular to the director resulting in a “bookshelf “ordering.

Smectic A is a phase in which the molecules are parallel to one another and are arranged in layers with the long axes perpendicular to the layer plane. This gives rise characteristic textures.

Smectic C is a smectic A like structure in which the long axes of the molecules of a tilted average angle differing from 90° with respect to the plane of the layer in a "bookshelf” arrangement. Light can be diffracted off the periodic spaces give a variety of patterns.


This molecule goes from crystalline to Smectic B, to smectic, C to smectic, A to nematic, to isotropic at various temperatures.

<math>K \quad _{\overrightarrow {113^{\circ} C}} \quad B \quad _{\overrightarrow {144^{\circ} C}} \quad C \quad _{\overrightarrow {172^{\circ} C}} \quad A \quad _{\overrightarrow {200^{\circ} C}} \quad N \quad _{\overrightarrow {200^{\circ} C}} \quad I\,\!</math>


Smectic C* molecules are visualized as cones showing possible orientations of the dipole

Smectic C* If a smectic phase is chiral and has an off axis dipole then as you go from layer to layer the director will maintain a tilt angle with respect to the layer plane but that rotates about a cone from layer to layer. The molecules can rotate about the cone; a chiral rotation. Smectic C* often have a dipole that off the axis of the director.

For more liquid crystal images see Liquid Crystal Institute



Ferroelectric Smectic C*

An applied electric field will align the dipoles of ferroelectric molecules creating a bulk dipole moment

If the helix can be unwound such that all the dipoles (and directors stay at the same angle as shown below) then the molecules will form a ferroelectric phase. The bulk material will have a net alignment of all the dipoles and therefore a bulk dipole moment. Unwinding is accomplished by use of a surface stabilizing layer and on both ends of a cell whose length a shorter than the helical pitch and the materials is thus called a surface stabilized ferroelectric LCD (SSFLCD). The cell is coated with a polyimide and unidirectionally rubbed, causing the molecular layers near the surface to align with the direction of rubbing. This results in a bulk electric field in the material due the alignment of all the dipoles. This means that the change in the field can cause the dipoles to rotate which changes the orientation of the director which in turn influences the optical properties of the material.


This was pioneered by Noel Clark at UC Boulder [1]

Discotic Liquid Crystals

Nematic Discotic (left) and Columnar Discotic (right) liquid crystals

A discotic phase in one is which flat molecules typically with threefold or four fold symmetry that have a rigid core and several floppy side chains stacked with their planes lying roughly parallel to one another. Thus, the director is oriented roughly perpendicular to the plane of the molecule. If you throw pieces of paper down they will stack up as parallel planes. There is a difference in the definition of the director between calamitic and nematic liquid crystals. In calamitic liquid crystals the director is defined as being along the axis of the moment of inertia of the molecules. In nematic liquid crystals the director is perpendicular to the average plane of all the liquid crystals.


In nematic discotics phases there is no positional order between the molecules, only orientational order.

In the case of columnar discotic phases the molecules themselves lie roughly on top of each other, so there is some degree of positional order. This columns of discs tend to form hexagonal patterns and these phases are called hexagonal columnar discotics. Columnar molecules can have specific shapes which cause them to line up perfectly or rotate as they fit together.

Error creating thumbnail: Unable to save thumbnail to destination
A phthalocyanine

Klaus Mullen is a talented chemist at the Max Planck Institute for Polmer Science in Mainz. He has started to make graphitic type molecules based on molecules such as triphenylene, thalocyanine, and hexobenzochoridine. The common characteristic is a common π core that is roughly flat with flexible alkyl chains on the periphery. These molecules have been examined for use as charge transport materials.

see Mullen 2004 [2]

Charge Transport in Liquid Crystals


Hopping Mechanism for Charge Transport

Hopping transport in donor an acceptor materials

In the hopping model of transport there is series of redox reactions in which electrons are transferred from site to site. This requires a good overlap between the orbitals. Discotic crystals have the ability to overlap.

See Band Regime versus Hopping Regime

Increasing Order in Materials

Charge mobility increases with intermolecular order

The charge mobility increases with the increase in intermolecular order. An amorphous polymer has no crystalline order, no positional order or orientational order. At the other extreme is the crystalline order that is “perfectly” stacked. Usually even crystals that are 99.9% pure will have an impurity in a cell that is only 10x10x10 molecules. Cyrstals are seldom pure or perfect. The typical tools we use for elemental analysis have an error bar in the range of impurity concentrations that will cause a problem for electronic purposes. Elemental analysis can tell you things are not good, but can’t really tell you that you are dealing with pure materials.

There is an intermediate a degree of order in the liquid crystal materials. Both discotic and calamitic materials have been explored for transport. The predictability of getting a discotic liquid crystalline phase is somewhat higher that predicting crystal structures. However, the degree of certainty of where the molecules are in the liquid crystal phase is lower that you get with a single crystal that can be studied with a X-ray crystallography.

Charge mobilities (measured in cm2/Vs) for amorphous materials are <10-3 and single crystal are more than 1 cm2/Vs (typical of amorphous silicon)

Core Size Effects on Charge Mobility

Trends for core size and associated charge carrier mobility

This study shows that for a certain class of the molecules with increasing core size there is a tendency for higher mobilities. There may be specific interactions that lead to a higher degree of order and there molecular properties which contribute to higher mobility. All these discotic liquid crystal materials have better mobilities than amorphous materials.



See Warman 2001 [3].


Extending the size of the core: From Perylene to Coronene

Coronene

The perylene diimide has a columnar discotic pattern with a mobility of about 1 cm2/Vs . A coronene with a large core with a mobility of 3 cm2/Vs. You can use these materials for their electronic properties as well as their optical properties.


Summary of Phases and Order

phase order
Isotropic liquid full continuous translational and rotational symmetry (on average)
Nematic molecular orientation breaks rotational symmetry, one axis is different from another axis


untilted tilted
Smectic-A Smectic-C layering breaks translational symmetry; in smectic-C molecules are tilted
Hexatic SBSI SK Like the smectic A they are stacks of liquid layers but the molecules tend to be positioned along a hexagonal lattice within each plane


Plastic crystals - Smectic (Crystal) - B the rigid part of the crystals stay ordered but the long chain aliphatic tail melt (according to de Gennes), more appropriately called a crystal

Crystal- molecular rotation freezes out

  • The degree of order increases from the top to the bottom of the table. In general, phases from the top of the table are expected at high temperatures, and phases from the bottom at low temperatures.
  • In the discotic phase, and columnar phases, translational symmetry is broken in not one but two spatial directions, leaving liquid-like order only along columns.

References

  1. ↑ N.A. Clark and S.T. Lagerwall, Appl. Phys. Lett., 1980, 36, 899
  2. ↑ http://www.rsc.org/ej/jm/2004/b312789c.pdf
  3. ↑ van de Craats, A. M.; Warman, J. M. Adv. Mater. 2001, 13,130-133
Previous Topic Return to Liquid Crystal Menu Next Topic
Retrieved from "http://cleanenergywiki.org/index.php?title=Classification_and_Examples_of_Liquid_Crystals&oldid=7523"