Difference between revisions of "Total Internal Reflection"

From CleanEnergyWIKI
Jump to navigation Jump to search
m
 
(55 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Main_Page#Basics of Light|Return to Basics of Light Menu]] | [[Dispersion and Scattering of Light|Next Topic]]
<table id="toc" style="width: 100%">
A critical concept in the case of optical fibers is the case total internal reflection. The bending of light as it goes into medium is related to the index of reflection of the materials.
<tr>
<td style="text-align: left; width: 33%">[[Optical Fibers|Previous Topic]]</td>
<td style="text-align: center; width: 33%">[[Main_Page#Optical Fibers, Waveguides, and Lasers|Return to Optical Fibers, Waveguides, and Lasers Menu]]</td>
<td style="text-align: right; width: 33%">[[Planar Dielectric Waveguides|Next Topic]]</td>
</tr>
</table>


By Snells law  when n<sub>1</sub> > n<sub>2</sub> then <math>\theta_1\,\!</math> is less than <math>\theta_2\,\!</math>.
== Total Internal Reflection ==
[[Image:Snellslaw.png|thumb|300px| When &theta;<sub>1</sub> > &theta;<sub>1c</sub> light can not enter medium n<sub>2</sub>]]


As you decrease the angle theta 1 and bring the light closer to parallel with the interface you reach a critical angle theta1c where there is total internal reflection.
A critical concept in the case of optical fibers is the concept of total internal reflection. The bending of light as it goes from one medium into another is related to the index of reflection of the materials (n<sub>1</sub> and n<sub>2</sub>). By Snell's law when n<sub>1</sub> > n<sub>2</sub> then &theta; <sub>1</sub> is less than &theta;<sub>2</sub>. As you decrease the angle &theta;<sub>1</sub> and bring the light closer to parallel with the interface you reach a critical angle &theta;<sub>1c</sub> where there is total internal reflection.


if Θ<sub>1</sub> keeps Increasing: Θ<sub>2</sub> approaches 90°
Snells laws are also known as Fresnel's Equations:


for a critical angle Θ<sub>1c</sub>, Θ<sub>2</sub> = 90°and the beam emerges along the surface
:<math>\theta _i = \theta _r\,\!</math>


Θ<sub>2</sub> = 90°  sin Θ<sub>2</sub> = 1
and


if Θ<sub>1</sub> > Θ<sub>1c</sub>: total reflection
:<math>\frac {sin \theta_i} {\theta_t} = \frac {n_2} {n_1}\,\!</math>


this is a critical process in optical fibers and waveguides because it can carry light for long distances. For these values of index of refraction you get a critical angle of 78.6 which means the light must be very nearly parallel to the interface.
where
:<math>\theta_i\,\!</math> is the angle of incidence


for n<sub>1</sub> = 1.53 and n<sub>2</sub> = 1.50 : Θ<sub>1c</sub> = 78.6°
:<math>\theta_r\,\!</math> is the angle of reflection


:<math>\theta_{c} = sin^{-1}(\frac {n_2} {n_1} )\,\!</math>


where:
:<math>\theta_{c}\,\!</math> is the critical angle


:<math>n_1 , n_2\,\!</math> are the index of refraction of the two media


[[Image:Wavelength_inside.jpg|thumb|300px|]]
 
if &theta;<sub>1</sub> keeps Increasing: &theta;<sub>2</sub> approaches 90°
 
for a critical angle Θ<sub>1</sub>, Θ<sub>2</sub> = 90°and the beam emerges along the surface
 
When
 
:<math>\theta_2 = 90° \rightarrow sin \theta_2 = 1\,\!</math>
 
:<math>\theta_{1c}  = sin^{-1} \left (\frac {n_2} {n_1} \right )\,\!</math>
 
 
and when
 
:<math>\theta_1 > \theta_{1c}\,\!</math> there is total reflection
 
In this case there is no transmitted light in the second medium (the irradiance of the reflected and incident beams is equal). Light interacts at the interface and there is a phase shift between the incident and the reflected beams which is dependent on the two materials.
 
This is a critical process in optical fibers and waveguides because it can carry light for long distances. For these values of index of refraction you get a critical angle of 78.6 which means the light must be very nearly parallel to the interface.
 
for n<sub>1</sub> = 1.53 and n<sub>2</sub> = 1.50 : &theta;<sub>1c</sub> = 78.6°
 
 
 
<br clear='all'>
 
=== Simulations ===
 
 
This flash simulation shows how total internal reflection and minimum radius of turns depends on the diameter of the optical fiber. The diameter changes how much of the light is below the critical angle where it is fully reflected.
 
<swf width="500" height="400">http://concave.stc.arizona.edu/thepoint/Interactive/ofiber.swf</swf>
 
 
This simulation allows you to select combinations of materials with different indexes of refraction. Try to get the best combination to achieve total internal reflection.
<swf width="500" height="400">http://concave.stc.arizona.edu/thepoint/Interactive/ofiberapp2.swf</swf>
 
[[category:light]]
<table id="toc" style="width: 100%">
<tr>
<td style="text-align: left; width: 33%">[[Optical Fibers|Previous Topic]]</td>
<td style="text-align: center; width: 33%">[[Main_Page#Optical Fibers, Waveguides, and Lasers|Return to Optical Fibers, Waveguides, and Lasers Menu]]</td>
<td style="text-align: right; width: 33%">[[Planar Dielectric Waveguides|Next Topic]]</td>
</tr>
</table>

Latest revision as of 11:55, 29 December 2009

Previous Topic Return to Optical Fibers, Waveguides, and Lasers Menu Next Topic

Total Internal Reflection

When θ1 > θ1c light can not enter medium n2

A critical concept in the case of optical fibers is the concept of total internal reflection. The bending of light as it goes from one medium into another is related to the index of reflection of the materials (n1 and n2). By Snell's law when n1 > n2 then θ 1 is less than θ2. As you decrease the angle θ1 and bring the light closer to parallel with the interface you reach a critical angle θ1c where there is total internal reflection.

Snells laws are also known as Fresnel's Equations:

<math>\theta _i = \theta _r\,\!</math>

and

<math>\frac {sin \theta_i} {\theta_t} = \frac {n_2} {n_1}\,\!</math>

where

<math>\theta_i\,\!</math> is the angle of incidence
<math>\theta_r\,\!</math> is the angle of reflection
<math>\theta_{c} = sin^{-1}(\frac {n_2} {n_1} )\,\!</math>

where:

<math>\theta_{c}\,\!</math> is the critical angle
<math>n_1 , n_2\,\!</math> are the index of refraction of the two media


if θ1 keeps Increasing: θ2 approaches 90°

for a critical angle Θ1, Θ2 = 90°and the beam emerges along the surface

When

<math>\theta_2 = 90° \rightarrow sin \theta_2 = 1\,\!</math>
<math>\theta_{1c} = sin^{-1} \left (\frac {n_2} {n_1} \right )\,\!</math>


and when

<math>\theta_1 > \theta_{1c}\,\!</math> there is total reflection

In this case there is no transmitted light in the second medium (the irradiance of the reflected and incident beams is equal). Light interacts at the interface and there is a phase shift between the incident and the reflected beams which is dependent on the two materials.

This is a critical process in optical fibers and waveguides because it can carry light for long distances. For these values of index of refraction you get a critical angle of 78.6 which means the light must be very nearly parallel to the interface.

for n1 = 1.53 and n2 = 1.50 : θ1c = 78.6°



Simulations

This flash simulation shows how total internal reflection and minimum radius of turns depends on the diameter of the optical fiber. The diameter changes how much of the light is below the critical angle where it is fully reflected.

<swf width="500" height="400">http://concave.stc.arizona.edu/thepoint/Interactive/ofiber.swf</swf>


This simulation allows you to select combinations of materials with different indexes of refraction. Try to get the best combination to achieve total internal reflection. <swf width="500" height="400">http://concave.stc.arizona.edu/thepoint/Interactive/ofiberapp2.swf</swf>

Previous Topic Return to Optical Fibers, Waveguides, and Lasers Menu Next Topic
Retrieved from "http://cleanenergywiki.org/index.php?title=Total_Internal_Reflection&oldid=5938"